Soft and Compressible Filter Bottle - 1 Litre - MT500

Flask with built-in and removable filter. You can use the product without filter just like a traditional flask.Before first use, rinse the bottle, top and filter with drinking water (3 x 1 minute).When using for the first time or whenever the filter is dry, fill the bottle with water, screw on the cap and leave to stand for a few minutes to prime the filter. Then draw in 5 quick sips to enable the water to flow.

Rinse your water bottle and the drinking water filter to remove dust and impurities.Fill the bottle with fresh water (avoid stale and stagnant water) from the best source available without polluting the teat or cap. The more clear and clean the water is before filtering (lack of impurities) the longer your filter will last.Be careful not to drink water that flows the length of your bottle when drinking. Make sure that the bottle is closed tightly.

Drink by inserting the teat into your mouth and pressing lightly on the body of the bottle to adjust the pressure and amount of water to drink.Your bottle no longer filters water when it reaches the end of its lifespan.If you can no longer suck the water, it is time to replace the part that contains the filter.Thoroughly dry your filter after use.

We use a hollow-fibre filter that has pores of around 0.2 micrometres in diameter.It eliminates:- 99.9999% of bacteria (for example: E.coli); - 99.9% ofProtozoa (for example Cryptosporidium);- Micro-organisms.DOES NOT ELIMINATE VIRUSES.Do not use to treat sea water or water contaminated by chemicals

After each use, unscrew the cap, rinse the bottle, top and filter with drinking water and allow to dry thoroughly. Before washing the bottle, remove the filter.Do not put the filter in the dishwasher. Do not try to clean the fibres in the plastic housing. If in doubt, change the filter.

Store in a cool, clean and dry place after completely drying the product.If, when you reuse the filter, you find that the water no longer passes through it or only with great difficulty, here's what to do.Immerse the filter in clean, clear water for about 15 minutes to dissolve any dirt that may have stuck to the surface of the filter membrane. Then rinse the filter and leave it to dry.It should be back to its best.

Volume: 1 litreSize: Ø 8,5 cm x h 27 cmTotal weight: 180 gramsBottle weight: 140 g.Filter weight: 40 g.Filter dimensions: Ø 6,5 cm x h 8 cmAvailable in 0.6 L and 1 LAvailable with or without filter.The filter is also sold separately.

Drinking untreated water and improper use can expose you to harmful micro-organisms and increase the risk of gastrointestinal disorders.You can reduce these risks by following these safety instructions and by getting more information on the water sanitation conditions in the areas you’ll be visiting.If in doubt, we advise you to enhance the filtering process by using water purification tablets.

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.