Traction
Highly non-slip rubber outsole with 5mm gripping studs.
🚚 Free delivery on orders over SAR 299* | Excludes heavy items
Cart
Your cart is empty
Beat the wet with this waterproof walking shoe. With a waterproof upper, sturdy sole, and its EVOFIT concept that adapts to your foot, it's a walking shoe designed for total comfort.
Highly non-slip rubber outsole with 5mm gripping studs.
Resistant rubber stone guards at the front and back of the foot.
Waterproof and breathable membrane lining: your feet dry for 6hr in all weather
EVA foam with different density at the heel: comfort/protection from the ground.
EVOFIT concept, generous fit that adapts to the width of the front of the foot
445g for size 43 (UK 8 1/2)
Description
We have classified our products in terms of performance and features for 3 levels of Mountain Walking: - occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10km and less than 700m in elevation gain. - Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing. - Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in. We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.
The most important thing is to try on several sizes and styles of boots to find the one most suited to you! You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction. Tip: keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forwards inside the boot.
In a laboratory, the shoe is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.
Some Decathlon stores have a test route. 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening. 3. Check two points: - the heel does not come up before the shoe when you walk uphill. - the foot does not slide and the toes do not press against the front when going downhill. 4. Try on several sizes and models. Break them in gradually to adapt them to your foot.
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a boot in your size (consult the size guide) - Wear the right type of socks - Lace up and tighten your boots properly - When you wear your boots for the first time, keep the outing short
The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 500 km
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
The original insole in your shoes is designed to accommodate most feet. A change of insole can bring: 1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning. 3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
- Leave to air dry. - Remove dry mud with a stiff brush. - Clean marks using a brush and some warm water - Leave to dry - Spray with a re-waterproofing product to restore the water-resistance to the upper.
A waterproof shoe will be less breathable than a non-waterproof shoe. Socks like the MH500 with a medium-length upper are therefore better for wicking away perspiration and reducing friction.
This boot is fitted with the EVOFIT concept. With its stretch materials and specific design for the area of the foot where the joints are located, EVOFIT technology allows the boot to perfectly fit the shape of your foot.
Description
We have classified our products in terms of performance and features for 3 levels of Mountain Walking: - occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10km and less than 700m in elevation gain. - Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing. - Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in. We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.
The most important thing is to try on several sizes and styles of boots to find the one most suited to you! You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction. Tip: keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forwards inside the boot.
In a laboratory, the shoe is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.
Some Decathlon stores have a test route. 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening. 3. Check two points: - the heel does not come up before the shoe when you walk uphill. - the foot does not slide and the toes do not press against the front when going downhill. 4. Try on several sizes and models. Break them in gradually to adapt them to your foot.
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a boot in your size (consult the size guide) - Wear the right type of socks - Lace up and tighten your boots properly - When you wear your boots for the first time, keep the outing short
The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 500 km
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
The original insole in your shoes is designed to accommodate most feet. A change of insole can bring: 1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning. 3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
- Leave to air dry. - Remove dry mud with a stiff brush. - Clean marks using a brush and some warm water - Leave to dry - Spray with a re-waterproofing product to restore the water-resistance to the upper.
A waterproof shoe will be less breathable than a non-waterproof shoe. Socks like the MH500 with a medium-length upper are therefore better for wicking away perspiration and reducing friction.
This boot is fitted with the EVOFIT concept. With its stretch materials and specific design for the area of the foot where the joints are located, EVOFIT technology allows the boot to perfectly fit the shape of your foot.
Composition
Composition
0 reviews
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.