Easy transport
Total weight 2.85 kg
Compression cover - 9 litres
Dimensions 39 x 16 x 15 cm
🚚 Free delivery on orders over SAR 299* | Excludes heavy items
Cart
Your cart is empty
Introducing our spacious and easy to pitch 2-person tent. Backpack and pannier friendly for hiking or bike packing trips, this tent will keep you comfortable even when the wind and rain come knocking.
Total weight 2.85 kg
Compression cover - 9 litres
Dimensions 39 x 16 x 15 cm
Self-standing dome
Quick: pre-assembled bedroom and flysheet. Standard poles
60 cm wide per person.
Bedroom height 108 cm.
2 doors, 2 awnings, 2 pockets
Resists 70km/h (Force 8) winds: validated in wind tunnels on rotating plate.
Water column (Schmerber):
Flysheet > 2000 mm.
Groundsheet > 5000 mm.
Doors and bedroom with mosquito nets.
Two-way zip on door.
Inner bedroom, flysheet and pole section available as spare parts
Description
As designers, we care about the repairability of our products; you’ll find spare parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, on the website or at the address support.decathlon.co.uk If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store. Repair kit (ferrule, patch): 20 g
Your tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun. We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 70km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
Total weight 2.85kg Separable elements to share the load Flysheet 1,075g Bedroom 835g Pole kit 600g Pegs (12 units) 180g Guy ropes (4 units) 40g Bag 80g + Peg bag 20g Repair kit (ferrule) 20g Weight, volume and dimensions may vary slightly due to manufacturing tolerances.
A groundsheet (sold separately, reference: 8933562) has been designed to add an additional layer of protection to the MT500 2P tent. This extra protection reduces abrasion and improves the waterproofing of the tent (by limiting the rising damp from the ground). It also lets you pitch your tent in tarp mode, without the bedroom.
Extremely quick pitching/striking. The flysheet and bedroom are pre-assembled. You then need to insert the tent pole in the sleeves of the flysheet (colour code). It is also quick to strike. To store the tent in its bag, just fold up the tent until it is as wide as the bag, fold up the tent poles into a bundle and place them on the bedroom or the flysheet, and roll everything up into a small bundle to fit it all in the bag.
Length of the bedroom 210 cm Winter 120 cm Inside height 108 cm (at the highest) Total height of the tent 120 cm Two awnings (storage space between the bedroom and the flysheet) 60 cm deep that can each hold a 50 to 70 litre rucksack, mountain equipment as well as a pair of hiking shoes. 2 pockets in bedroom. 1 inner hook at the top for hanging a lamp and an adjustable horizontal clothes line.
Bedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. Large vent at front of tent and additional vent at feet end. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Vents and good air flow will help reduce humidity inside your tent.
Forclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 75 denier polyester flysheet, polyurethane-coated (interior) water-repellent treatment (exterior), P75D groundsheet in the bedroom. Seams taped with heat-sealed strips. Multi-component bedroom (P66D) that is breathable, provides protection from the wind and reduces condensation.
7001 aluminium poles. Ø 8.5 mm dome; top tent pole Ø 9.5 mm. Durable lightweight aluminium. Tent pegs/stakes: Length 17 cm, Ø 6.1 mm. Non-anodised 7075 aluminium for increased strength and maximum lightness. Traditional dome shape that makes the structure free-standing and gives it good durability. Top pole provides volume and therefore capacity.
Description
As designers, we care about the repairability of our products; you’ll find spare parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, on the website or at the address support.decathlon.co.uk If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store. Repair kit (ferrule, patch): 20 g
Your tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun. We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 70km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
Total weight 2.85kg Separable elements to share the load Flysheet 1,075g Bedroom 835g Pole kit 600g Pegs (12 units) 180g Guy ropes (4 units) 40g Bag 80g + Peg bag 20g Repair kit (ferrule) 20g Weight, volume and dimensions may vary slightly due to manufacturing tolerances.
A groundsheet (sold separately, reference: 8933562) has been designed to add an additional layer of protection to the MT500 2P tent. This extra protection reduces abrasion and improves the waterproofing of the tent (by limiting the rising damp from the ground). It also lets you pitch your tent in tarp mode, without the bedroom.
Extremely quick pitching/striking. The flysheet and bedroom are pre-assembled. You then need to insert the tent pole in the sleeves of the flysheet (colour code). It is also quick to strike. To store the tent in its bag, just fold up the tent until it is as wide as the bag, fold up the tent poles into a bundle and place them on the bedroom or the flysheet, and roll everything up into a small bundle to fit it all in the bag.
Length of the bedroom 210 cm Winter 120 cm Inside height 108 cm (at the highest) Total height of the tent 120 cm Two awnings (storage space between the bedroom and the flysheet) 60 cm deep that can each hold a 50 to 70 litre rucksack, mountain equipment as well as a pair of hiking shoes. 2 pockets in bedroom. 1 inner hook at the top for hanging a lamp and an adjustable horizontal clothes line.
Bedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. Large vent at front of tent and additional vent at feet end. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Vents and good air flow will help reduce humidity inside your tent.
Forclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 75 denier polyester flysheet, polyurethane-coated (interior) water-repellent treatment (exterior), P75D groundsheet in the bedroom. Seams taped with heat-sealed strips. Multi-component bedroom (P66D) that is breathable, provides protection from the wind and reduces condensation.
7001 aluminium poles. Ø 8.5 mm dome; top tent pole Ø 9.5 mm. Durable lightweight aluminium. Tent pegs/stakes: Length 17 cm, Ø 6.1 mm. Non-anodised 7075 aluminium for increased strength and maximum lightness. Traditional dome shape that makes the structure free-standing and gives it good durability. Top pole provides volume and therefore capacity.
Composition
Composition
0 reviews
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.