🚚 Free delivery on orders over SAR 299* | Excludes heavy items
Cookie Policy
I agree to the processing of my data in accordance with the terms set out in the Privacy Policy.Cart
Your cart is empty
Home delivery within 2-4 days
Home delivery within 2-4 days
الدفع الآمن
نحن نقدم أيضًا الدفع على دفعتين أو ثلاث دفعات أو أربع دفعات عن طريق تابي وتمارا.
الدفع الآمن
نحن نقدم أيضًا الدفع على دفعتين أو ثلاث دفعات أو أربع دفعات عن طريق تابي وتمارا.
Returns and Exchanges
Returns and Exchanges
This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.
1. Remove the inner tube and locate the puncture 2. Sand the area around the puncture using the sandpaper provided (essential step) 3. Clean and dry this area 4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds 5. Put the inner tube back in the tyre and the tyre in the rim 6. Inflate your tyre to the recommended pressure.
Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light, in original packaging. Minimum temperature for repairs: from +10°C to + 40°C Usage temperature: -40°C to +65°C
A good sanding of the area concerned will give you a better result. The aim is to obtain a flat, clean surface so the patch holds as well as possible. If the puncture is close to excess material, sand until the excess is removed. Sanding will create micro-scratches that will allow the glue on your patch to set more easily. This stage is very important for a lasting repair.
Clean away any impurities to ensure a clean, flat and dry area to apply the patch. Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.
Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power. Remove any air bubbles from the centre of the patch towards the edges. Rub the patch with your finger to warm it up and help it stick better. Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).
To make sure that your patch remains in place for as long as possible on your repaired inner tube, we strongly recommend that you reinflate your inner tube within 24 hours of applying the patch and that you inflate it to the recommended pressure.
Do you want to repair a puncture in an inner tube without using a tube of glue? These 8 self-adhesive patches make for a quick and easy repair, so you can get back on your bike.
100% effective on all inner tubes.
Less restrictive and just as effective as a classic patch.
Easy to stick on and quick to use.
This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.
This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.
1. Remove the inner tube and locate the puncture 2. Sand the area around the puncture using the sandpaper provided (essential step) 3. Clean and dry this area 4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds 5. Put the inner tube back in the tyre and the tyre in the rim 6. Inflate your tyre to the recommended pressure.
Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light, in original packaging. Minimum temperature for repairs: from +10°C to + 40°C Usage temperature: -40°C to +65°C
A good sanding of the area concerned will give you a better result. The aim is to obtain a flat, clean surface so the patch holds as well as possible. If the puncture is close to excess material, sand until the excess is removed. Sanding will create micro-scratches that will allow the glue on your patch to set more easily. This stage is very important for a lasting repair.
Clean away any impurities to ensure a clean, flat and dry area to apply the patch. Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.
Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power. Remove any air bubbles from the centre of the patch towards the edges. Rub the patch with your finger to warm it up and help it stick better. Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).
To make sure that your patch remains in place for as long as possible on your repaired inner tube, we strongly recommend that you reinflate your inner tube within 24 hours of applying the patch and that you inflate it to the recommended pressure.
Do you want to repair a puncture in an inner tube without using a tube of glue? These 8 self-adhesive patches make for a quick and easy repair, so you can get back on your bike.
100% effective on all inner tubes.
Less restrictive and just as effective as a classic patch.
Easy to stick on and quick to use.
This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
